Search scope:
Shopping cart (0)
Standard

IEEE 802.3-2015

Revised

Note: Latest version: IEEE 802.3-2022

Preview Preview is not available

Existing or new amendments and versions must be purchased separately.

Language
Services

Abstract

Revision Standard - Superseded. Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted pair or fiber optic cables, or electrical backplanes. System considerations for multisegment shared access networks describe the use of Repeaters which are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include: various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted pair PHY types.

Products specifications

  • Standard from IEEE
  • Published:
  • Document type: IS
  • Pages
  • Publisher: IEEE
  • Distributor: IEEE
  • ICS: 35.100.10
  • ICS: 35.110
  • National Committee: IEEE Computer Society / LAN/MAN Standards Committee

Product Relations

  • Revised by: IEEE 802.3-2018
  • Referred by: IEEE 802.1CM-2018
  • Referred by: IEEE 802.16-2017
  • Referred by: IEEE 61158-2017
  • Referred by: IEEE 1904.1-2017
  • Referred by: IEEE 802.1AEcg-2017
  • Referred by: IEEE 802.21.1-2017
  • Referred by: IEEE 802.1AC-2016
  • Referred by: IEEE 8802-1BA-2016
  • Referred by: IEEE 8802-1BA-2016
  • Referred by: IEEE 8802-1Q-2016
  • Referred by: IEEE 8802-1X:2013/Amd. 1
  • Revises: IEEE 802.3-2012
  • Refers: IEC 60096-1:1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993.
  • Refers: ANSI/TIA-568-C.3-2008, Optical Fiber Cabling Components Standard.
  • Refers: IEC 60793-1-41:2001, Optical fibres--Part 1-41: Measurement methods and test procedures--Bandwidth.
  • Refers: EIA/JEDEC Standard EIA/JESD8-6, High Speed Transceiver Logic (HSTL), August 1995.
  • Refers: ANSI/TIA/EIA-455-175A-92, Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method.
  • Refers: ANSI X3.263-1995, Revision 2.2 (1 March 1995), FDDI Twisted Pair--Physical Medium Dependent (TPPMD).
  • Refers: ETSI TS 101 270-1 (1999), Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements.
  • Refers: IEC 60068, Basic environmental testing procedures.
  • Refers: ANSI/TIA/EIA-568-A-1995, Commercial Building Telecommunications Cabling Standard.
  • Refers: ANSI/TIA/EIA-455-203-2001, Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters.
  • Refers: ANSI T1.424-2004, Interface between networks and customer installations--Very-high Speed Digital Subscriber Lines (VDSL) Metallic Interface (DMT based).
  • Refers: ANSI T1.601-1992, Telecommunications--Integrated Services Digital Network (ISDN)--Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification).
  • Refers: IEC 60793-1:1995, Optical fibres--Part 1: Generic specification.
  • Refers: ANSI T1.605-1991, Telecommunications--Integrated Services Digital Network (ISDN)--Basic Access Interface for S and T Reference Point (Layer 1 Specification).
  • Refers: IEC 60793-1:1992, Optical fibres--Part 1: Generic specification.
  • Refers: IEC 60060 (all parts), High-voltage test techniques.
  • Refers: ANSI/TIA-568-C.0-2010, Generic Telecommunications Cabling.
  • Refers: ANSI X3.230-1994 (FC-PH), Information Technology--Fibre Channel--Physical and Signaling Interface.
  • Refers: ATIS-0900105.2008, Synchronous Optical Network (SONET)--Basic Description including Multiplex Structure, Rates, and Formats.
  • Refers: ANSI/TIA-568-C.2-2010, Copper Cabling Components.
  • Refers: CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
  • Refers: ANSI/TIA/EIA-455-204-2000, Measurement of Bandwidth on Multimode Fiber.
  • Refers: IEC 60603-7:1990, Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.
  • Refers: ANSI T1.417-2001, Spectrum Management for Loop Transmission Systems.
  • Refers: ATIS-0600416.1999(R2010), Network to Customer Installation Interfaces--Synchronous Optical NETwork (SONET)--Physical Layer Specification: Common Criteria.
  • Refers: ANSI T1.269-2000, Information Interchange--Structure and Representation of Trace Message Formats For The North American Telecommunications System.
  • Refers: IEC 60169-16:1982, Radio-frequency connectors, Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling--Characteristic impedance 50 ohms (75 ohms)(Type N).