Search scope:
Shopping cart (0)
Standard

IEEE 802.3-2008

Revised

Note: Latest version: IEEE 802.3-2022

Preview

Existing or new amendments and versions must be purchased separately.

Language
Services

Abstract

Revision Standard - Superseded. Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 10 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted pair or fiber optic cables. System considerations for multisegment shared access networks describe the use of Repeaters which are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds.

Products specifications

  • Standard from IEEE
  • Published:
  • Document type: IS
  • Pages
  • Publisher: IEEE
  • Distributor: IEEE
  • ICS: 35.100.10
  • ICS: 35.110
  • National Committee: IEEE Computer Society / LAN/MAN Standards Committee

Product Relations

  • Referred by: IEEE 8802-1AS-2014
  • Referred by: IEEE 8802-1AS-2014
  • Referred by: IEEE 802.1AS-2011/Cor 1-2013
  • Referred by: IEEE 1905.1-2013
  • Referred by: IEEE 1905.1-2013
  • Revised by: IEEE 802.3-2012
  • Referred by: IEEE 802.16-2012
  • Referred by: IEEE 802.1BA-2011
  • Referred by: IEEE 802.17-2011
  • Referred by: IEEE 1722-2011
  • Referred by: IEEE 802.1AS-2011
  • Referred by: IEEE 1473-2010
  • Referred by: IEEE 1901-2010
  • Referred by: IEEE 11073-30400-2010
  • Referred by: IEEE 802.16-2009
  • Referred by: IEEE 11073-00101-2008
  • Referred by: IEEE 802.1AX-2008
  • Revises: IEEE 802.3-2005
  • Refers: ANSI T1.105-1995--Telecommunications--Synchronous Optical Network (SONET)--Basic Description including Multiplex Structure, Rates and Formats.
  • Refers: IEC 60825-2:1993, Safety of laser products-Part 2-Safety of optical fibre communication systems.
  • Refers: ANSI/TIA/EIA-568-A-Commercial Building Telecommunications Cabling Standard.
  • Refers: ANSI T1.417-2001-Spectrum Management For Loop Transmission Systems.
  • Refers: IEC 60874-1:1993-Connectors for optical fibres and cables—Part 1: Generic specification.
  • Refers: IEC 60950-1:2001-Information technology equipment—Safety—Part 1: General requirements.
  • Refers: IEC 60060 (all parts)-High-voltage test techniques.
  • Refers: IEC 60794-2:1989-Optical fibre cables--Part 2: Product specifications.
  • Refers: IEC 60096-1:1986-Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993.
  • Refers: IEC 60603-7:1990-Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.
  • Refers: ANSI X3.230-1994 (FC-PH)-Information Technology—Fibre Channel—Physical and Signaling Interface.
  • Refers: ANSI/TIA/EIA-455-175A-92-Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method.
  • Refers: IEC 60807-2:1992-Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contacts-Fixed solder contact types.
  • Refers: ANSI/EIA-455-95A-2000-Absolute Optical Power Test for Optical Fibers and Cables.
  • Refers: ANSI/TIA/EIA-455-203-2001-Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters.
  • Refers: ANSI/TIA/EIA-568-B:2001-Commercial Building Telecommunications Cabling Standard.
  • Refers: IEC 60807-3:1990-Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts--Removable crimp contact types with closed crimp barrels, rear insertion/re
  • Refers: ANSI/TIA/EIA-568-B.3-2000-Optical Fiber Cabling Components Standard.
  • Refers: IEC 61000-4-3-Electromagnetic Compatibility (EMC)-Part 4: Testing and measurement techniques-Section 3: Radiated, radio-frequency, electromagnetic field immunity test.
  • Refers: IEC 60825-1:2001, Edition 1.2-Consolidated Edition; Safety of Laser Products—Part 1: Equipment classifi-cation, requirements and user’s guide.
  • Refers: ANSI/EIA/TIA-455-127-1991-FOTP-127--Spectral Characterization of Multimode Laser Diodes.
  • Refers: CISPR 22: 1993-Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
  • Refers: IEC 60068-Basic environmental testing procedures.
  • Refers: IEC 61076-3-101:1997-Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications-Part 3: Rectangular connectors—Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and ..
  • Refers: ANSI X3.263-1995, Revision 2.2 (1 March 1995)-FDDI Twisted Pair-Physical Medium Dependent (TP-PMD).
  • Refers: IEC 61076-3-103 (48B/574/NP)-Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, fixed and free shielded connectors with ribbon contacts for high speed data applications.
  • Refers: ANSI/TIA-568-B.2-10-2008-Transmission Performance Specifications for 4-pair 100 Ù Augmented Cate-gory 6 Cabling.
  • Refers: IEC 60793-1:1995-Optical fibres—Part 1: Generic specification.
  • Refers: IEC 60794-2-11 (2005)-Optical fibre cables—Part 2-11: Indoor cables-Detailed specification for simplex and duplex cables for use in premises cabling.
  • Refers: IEC 60794-1:1996-Optical fibre cables—Part 1: Generic specification.
  • Refers: IEC 60950:1991-Safety of information technology equipment.
  • Refers: IEC 60793-1-41:2001-Optical fibres--Part 1-41: Measurement methods and test procedures-Bandwidth.
  • Refers: IEC 61076-3-113, Ed. 1.0 (draft, 48B/1437/CD, 2 April 2004.)-[48B Secretariat 1327] Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates.
  • Refers: IEC 60169-8:1978 and -16:1982-Radio-frequency connectors, Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock—Characteristic impedance 50 ohms (Type BNC); Part 16: R.F. coaxial connectors with inner
  • Refers: ANSI T1.424-2004-Interface between networks and customer installations—Very-high Speed Digital Sub-scriber Lines (VDSL) Metallic Interface (Trial-Use Standard).
  • Refers: ANSI T1.269-2000-Information Interchange--Structure and Representation of Trace Message Formats For The North American Telecommunications System.
  • Refers: ANSI T1.601-1992-Telecommunications-Integrated Services Digital Network (ISDN)--Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification).
  • Refers: ANSI T1.416-1999-Telecommunications—Network to Customer Installation Interfaces—Synchronous Optical Network (SONET) Physical Layer Specification: Common Criteria.
  • Refers: IEC 60874-2:1993-Connectors for optical fibres and cables-Part 2: Sectional specification for fibre optic connector, Type F-SMA.
  • Refers: IEC 60793-2:1992-Optical fibres—Part 2: Product specifications.
  • Refers: ANSI/TIA/EIA-455-204-2000-Measurement of Bandwidth on Multimode Fiber.
  • Refers: EIA/JEDEC Standard EIA/JESD8-6-High Speed Transceiver Logic (HSTL), August 1995.
  • Refers: ANSI T1.605-1991-Telecommunications--Integrated Services Digital Network (ISDN)—Basic Access Interface for S and T Reference Point (Layer 1 Specification).
  • Refers: IEC 60794-3-12 (2005)-Optical fibre cables—Part 3-12: Outdoor fibre cables—Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling.
  • Refers: ETSI TS 270-2 (2001)-Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 2: Transceiver specification.
  • Refers: IEC 60874-10:1992-Connectors for optical fibres and cables—Part 10: Sectional specification, Fibre optic connector type BFOC/2,5.
  • Refers: ETSI TS1 101 270-1 (1999)-Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements.
  • Refers: IEC 60793-2-10 (2004)-Optical fibres—Part 2-10: Product specifications—Sectional specification for cate-gory A1 multimode fibres.