Search scope:
Shopping cart (0)
Standard

IEEE 802.3-1998

Revised

Note: Latest version: IEEE 802.3-2022

Preview

Existing or new amendments and versions must be purchased separately.

Language
Services

Abstract

Revision Standard - Superseded. The media access control characteristics for the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method for shared medium local area networks are described. The control characteristics for full duplex dedicated channel use are also described. Specifications are provided for MAU types 1BASE5 at 1 Mb/s; Attachment Unit Interface (AUI) and MAU types 10BASE5, 10BASE2, FOIRL (fiber optic inter-repeater link), 10BROAD36, 10BASE-T, 10BASE-FL, 10BASE-FB, and 10BASE-FP at 10 Mb/s; Media Independent Interface (MII) and PHY types 100BASE-T4, 100BASE-TX, 100BASE-FX, and 100BASE-T2 at 100 Mb/s; and the Gigabit MII (GMII) and 1000BASE-X PHY types, 1000BASE-SX, 1000BASE-LX, and 1000BASE-CX, which operate at 1000 Mb/s (Gigabit Ethernet). Repeater specifications are provided at each speed. Full duplex specifications are provided at the Physical Layer for 10BASE-T, 10BASE-FL, 100BASETX,100BASE-FX, 100BASE-T2, and Gigabit Ethernet. System considerations for multisegment networks at each speed and management information base (MIB) specifications are also provided.

Products specifications

  • Standard from IEEE
  • Published:
  • Document type: IS
  • Pages
  • Publisher: IEEE
  • Distributor: IEEE
  • ICS: 35.100.10
  • ICS: 35.110
  • National Committee: IEEE Computer Society / LAN/MAN Standards Committee

Product Relations

  • Referred by: IEEE 802.1D-2004
  • Revised by: IEEE 802.3-2000
  • Referred by: IEEE 802.5t-2000
  • Revises: IEEE 802.3-1985
  • Refers: CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
  • Refers: ANSI X3.263: 1995, Revision 2.2 (1 March 1995), FDDI Twisted Pair--Physical Medium Dependent (TPPMD) (ISO/IEC CD 9314-10).
  • Refers: ANSI T1.605-1991, Telecommunications--Integrated Services Digital Network (ISDN)- Basic Access Interface for S and T Reference Point (Layer 1 Specification).
  • Refers: IEC 60060 (all parts), High-voltage test techniques.
  • Refers: ANSI T1.601-1992, Telecommunications--Integrated Services Digital Network (ISDN)-- Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification).
  • Refers: ANSI X3.237-1995, Rev 2.1 (1 January 1995), FDDI Low-Cost Fibre Physical Layer - Medium Dependent (LCF-PMD) (ISO/IEC CD 9314-9).