Search scope:
Shopping cart (0)
Standard

IEEE 802.3-2012

Revised

Note: Latest version: IEEE 802.3-2022

Preview Preview is not available

Existing or new amendments and versions must be purchased separately.

Language
Services

Abstract

Revision Standard - Superseded. Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 100 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted-pair or fiber optic cables. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted-pair PHY types.

Products specifications

  • Standard from IEEE
  • Published:
  • Document type: IS
  • Pages
  • Publisher: IEEE
  • Distributor: IEEE
  • ICS: 35.100.10
  • ICS: 35.110
  • National Committee: IEEE Computer Society / LAN/MAN Standards Committee

Product Relations

  • Referred by: IEEE 802.11-2016
  • Revised by: IEEE 802.3-2015
  • Referred by: IEEE 8802-1AX-2016
  • Referred by: IEEE 1904.1-Conformance01-2014
  • Referred by: IEEE 1904.1-Conformance03-2014
  • Referred by: IEEE 1904.1-Conformance02-2014
  • Referred by: IEEE 802.1AX-2014
  • Referred by: IEEE 802.1Xbx-2014
  • Referred by: IEEE 802.1Q-2014
  • Referred by: IEEE 8802-1AB-2014
  • Referred by: IEEE 8802-1X-2013
  • Referred by: IEEE 8802-1AE-2013
  • Referred by: IEEE 1904.1-2013
  • Referred by: IEEE 802.3.1-2013
  • Referred by: IEEE 802.3.1-2013
  • Revises: IEEE 802.3-2008
  • Refers: ANSI/TIA/EIA-455-175A-92, Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method.
  • Refers: ANSI T1.269-2000, Information Interchange—Structure and Representation of Trace Message Formats For The North American Telecommunications System.2
  • Refers: ANSI X3.263-1995, Revision 2.2 (1 March 1995), FDDI Twisted Pair—Physical Medium Dependent (TPPMD).
  • Refers: ANSI T1.601-1992, Telecommunications—Integrated Services Digital Network (ISDN)—Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification).
  • Refers: ANSI/TIA/EIA-455-203-2001, Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters.
  • Refers: ETSI TS 101 270-1 (1999), Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements.6
  • Refers: 3ATIS publication are available from the Alliance for Telecommunications Industry Solutions (http://atis.org).
  • Refers: EIA/JEDEC Standard EIA/JESD8-6, High Speed Transceiver Logic (HSTL), August 1995.5
  • Refers: IEC 60793-1-41:2001, Optical fibres—Part 1-41: Measurement methods and test procedures—Bandwidth.
  • Refers: 2ANSI publications are available the American National Standards Institute (http://www.ansi.org).
  • Refers: 4CISPR documents are available from the International Electrotechnical Commission (http://www.iec.ch/). CISPR documents are also available in the United States from the American National Standards Institute (http://www.ansi.org).
  • Refers: 7IEC publications are available from the International Electrotechnical Commission (http://www.iec.ch/). IEC publications are also available in the United States from the American National Standards Institute (http://www.ansi.org).
  • Refers: ANSI/TIA/EIA-568-A-1995, Commercial Building Telecommunications Cabling Standard.
  • Refers: ANSI T1.605-1991, Telecommunications—Integrated Services Digital Network (ISDN)—Basic Access
  • Refers: CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.4
  • Refers: ANSI T1.417-2001, Spectrum Management for Loop Transmission Systems.
  • Refers: IEC 60793-1:1992, Optical fibres—Part 1: Generic specification.
  • Refers: 6ETSI publications are available the European Telecommunications Standards Institute (http://www.etsi.org).
  • Refers: IEC 60169-16:1982, Radio-frequency connectors, Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—Characteristic impedance 50 ohms (75 ohms)(Type N).
  • Refers: ANSI X3.230-1994 (FC-PH), Information Technology—Fibre Channel—Physical and Signaling Interface.
  • Refers: ANSI/TIA/EIA-455-204-2000, Measurement of Bandwidth on Multimode Fiber.
  • Refers: ATIS-0900105.2008, Synchronous Optical Network (SONET)—Basic Description including Multiplex Structure, Rates, and Formats.
  • Refers: IEC 60096-1:1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993.
  • Refers: IEC 60068, Basic environmental testing procedures.
  • Refers: Interface for S and T Reference Point (Layer 1 Specification).
  • Refers: IEC 60603-7:1990, Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.
  • Refers: ANSI T1.424-2004, Interface between networks and customer installations—Very-high Speed Digital
  • Refers: ANSI/TIA-568-C.2-2010, Copper Cabling Components.ANSI/TIA-568-C.3-2008, Optical Fiber Cabling Components Standard.
  • Refers: Subscriber Lines (VDSL) Metallic Interface (Trial-Use Standard).
  • Refers: IEC 60060 (all parts), High-voltage test techniques.7
  • Refers: ATIS-0600416.1999(R2010), Network to Customer Installation Interfaces—Synchronous Optical NETwork (SONET)—Physical Layer Specification: Common Criteria.3
  • Refers: 5EIA publications are available from the IHS Standards Store (http://global.ihs.com/). JEDEC publications are available from the JEDEC Solid State Technology Association (http://www.jedec.org).
  • Refers: ANSI/TIA-568-C.0-2010, Generic Telecommunications Cabling.
  • Refers: IEC 60793-1:1995, Optical fibres—Part 1: Generic specification.