Chercher dans:
Panier (0)
Standard

IEEE C57.12.29-2023

Actuel

Note: Actuellement en cours d'élaboration: IEEE C57.12.29-2023

Aperçu

Amendements et versions existants ou nouveaux doivent être achetés séparément.

Langue
Format

Résumé

Revision Standard - Active. Conformance tests and requirements for the coating integrity of above grade pad-mounted enclosures for application in coastal environments that contain apparatus energized in excess of 600 V may be exposed to the general public. These include, but are not limited to, the following types of equipment enclosures: pad-mounted capacitors or inductors, pad-mounted distribution transformers, pad-mounted junction enclosures, pad-mounted metering equipment, and pad-mounted voltage regulators.

Spécifications des produits

  • Standard de IEEE
  • Publié:
  • Type de document: IS
  • Pages
  • Editeur: IEEE
  • Distributeur: IEEE
  • Comité national: IEEE Power and Energy Society / Transformers
  • ICS: 29.180

Relations produit

  • Révise: IEEE C57.12.29-2014
  • Référence: ASTM D4587, Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings.
  • Référence: ASTM D3359, Standard Test Methods for Rating Adhesion by Tape Test.
  • Référence: ASTM D3170, Standard Test Method for Chipping Resistance of Coatings.
  • Référence: ASTM D714, Standard Test Method for Evaluating Degree of Blistering of Paints.
  • Référence: ASTM D660, Standard Test Method for Evaluating Degree of Checking of Exterior Paints.
  • Référence: UL 94, Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
  • Référence: ASTM D4585, Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation.
  • Référence: UL 746C, Polymeric Materials--Use in Electrical Equipment Evaluations.
  • Référence: ASTM D1654-05, Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
  • Référence: ASTM D661, Standard Test Method for Evaluating Degree of Cracking of Exterior Paints.
  • Référence: ASTM D4060, Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser.
  • Référence: ASTM D3363, Standard Test Method for Film Hardness by Pencil Test.
  • Référence: ASTM D610, Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces.
  • Référence: ASTM B117, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Référence: ASTM D523, Standard Test Method for Specular Gloss.