Chercher dans:
Panier (0)
Standard

IEEE 516-2009

Radié

Note: Version actuelle: IEEE 516-2021

Aperçu

Amendements et versions existants ou nouveaux doivent être achetés séparément.

Langue
Format

Résumé

Revision Standard - Inactive-Reserved. This guide provides the general recommendations for performing maintenance work on energized power lines. It is not intended to include all of the proven practical methods and procedures, however, these selected comprehensive recommendations are based on sound engineering principles, engineering safety considerations, and field experience by many utilities. Included are technical explanations as required to cover certain laboratory testing of tools and equipment, in-service inspection, maintenance and care of tools and equipment, and work methods of the maintenance of energized lines for persons working in vicinity of power lines.

Spécifications des produits

  • Standard de IEEE
  • Publié:
  • Radié:
  • Type de document: IS
  • Pages
  • Editeur: IEEE
  • Distributeur: IEEE
  • ICS: 29.240.20
  • Comité national: IEEE Power and Energy Society / Transmission and Distribution

Relations produit

  • Révisé par: IEEE 516-2021
  • Référencé par: IEEE 1863-2019
  • Référencé par: IEEE 1863-2019
  • Référencé par: IEEE 1523-2018
  • Référencé par: IEEE 1726-2013
  • Référencé par: IEEE 1726-2013
  • Référence: IEEE 1070-2006
  • Référence: IEEE C2-2007
  • Référence: IEEE 957-2005
  • Référence: IEEE 1067-2005
  • Référence: IEEE 1307-2004
  • Référence: IEEE 524-2003
  • Référence: IEEE 1048-2003
  • Révise: IEEE 516-2003
  • Référence: IEEE C62.92.1-2000
  • Référence: IEEE 1313.2-1999
  • Référence: IEEE 62-1995
  • Référence: IEEE 935-1989
  • Référence: ASTM F 2522-05, Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards.
  • Référence: IEC 60060-3, High-Voltage Test Techniques—Part 3: Measuring Devices.
  • Référence: IEC 61112, Blankets of Insulating Material for Electrical Purposes.
  • Référence: ASTM F 478, Standard Specification for In-service Care of Insulating Line Hose and Covers.
  • Référence: ASTM F 479, Standard Specification for In-service Care of Insulating Blankets.
  • Référence: ASTM F 1236, Standard Guide for Visual Inspection of Electrical Protective Rubber Products.
  • Référence: ANSI/SIA A92.2, American National Standard for Vehicle-Mounted Elevating and Rotating Aerial Devices.1
  • Référence: IEC 60625-1, Programmable Measuring Instruments—Interface System (byte serial, bit parallel)—Part 1: Functional, Electrical and Mechanical Specification, System Applications and Requirements for the Designer and User.
  • Référence: ASTM F 496, Standard Specification for In-service Care of Insulating Gloves and Sleeves.
  • Référence: ASTM F 696, Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens.
  • Référence: Electric Power Lines and Equipment.
  • Référence: ASTM F 968, Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of
  • Référence: ASTM F 855, Standard Specification for Temporary Protective Grounds to be Used on De-Energized
  • Référence: ASTM D 1049, Standard Specification for Rubber Insulating Covers.
  • Référence: IEC 61229, Rigid Protective Covers for Live Working on AC Installations.
  • Référence: Workers.
  • Référence: IEC 60625-2, Programmable Measuring Instruments
  • Référence: CSA C225, Vehicle-Mounted Aerial Devices.3
  • Référence: IEC 60903, Specifications for Glovers and Mitts of Insulating Material for Live Working.
  • Référence: IEC 60060-4, High-Voltage Test Techniques—Part 4: Application Guide for Measuring Devices.
  • Référence: IEC 61111, Matting of Insulating Material for Electrical Purposes.
  • Référence: IEC 60984, Sleeves of Insulating Material for Live Working.
  • Référence: Line Tools.
  • Référence: IEC 61230, Live Working—Portable Equipment for earthing or earthing and short-circuiting.
  • Référence: ASTM D 1051, Standard Specification for Rubber Insulating Sleeves.
  • Référence: ASTM F 711, Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live
  • Référence: IEC 60060-1, High-Voltage Test Techniques—Part 1: General Definitions and Test Requirements.4
  • Référence: ASTM D 1050, Standard Specification for Rubber Insulating Line Hose.
  • Référence: ASTM F 1701, Standard Specification for Unused Polypropylene Rope with Special Electrical Properties.
  • Référence: IEC 61057, Aerial Devices with Insulating Boom used for Live Working.
  • Référence: ASTM F 712, Electrically Insulating Plastic Guard Equipment for Protection of Workers.
  • Référence: IEC 61236, Saddles, Pole Clamps (Stick Clamps) and Accessories for Live Working.
  • Référence: IEC 61235, Live Working—Insulating Hollow Tubes for Electrical Purposes.
  • Référence: IEC 60895, Live Working—Conductive Clothing for use at Nominal Voltage up to 800 kV AC and 600 kV DC.
  • Référence: IEC 60060-2, High-Voltage Test Techniques—Part 2: Measuring Systems.
  • Référence: ASTM D 120, Standard Specification for Rubber Insulating Gloves.2
  • Référence: IEC 60855, Insulating Foam-Filled Tubes and Solid Rods for Live Working.
  • Référence: ASTM D 1048, Standard Specification for Rubber Insulating Blankets.