Panier (0)
Standard

IEEE 299.1-2013

Actuel
Aperçu

Amendements et versions existants ou nouveaux doivent être achetés séparément.

Langue
Format

Achat d'une licence utilisateur unique

Reproduction interdite. Veuillez nous contacter pour des informations sur les licences.

Bénéficiez d'une remise de 20 % pour les nouveaux clients sur les abonnements aux normes SNV et les licences multi-utilisateurs.

Résumé

New IEEE Standard - Inactive-Reserved. This standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety of enclosures and boxes having all dimensions between 0.1 m and 2 m in the radio frequency range not addressed by IEEE Std 299(TM)-2006. This standard is divided into two parts: Part I - 0.75 m to 2 m and Part II - physically small (< 0.75 m) but electrically large enclosures. In addition to a number of annexes aiding the measurement of shielding effectiveness of these enclosures, Annex I addresses physically small and electrically small enclosures, and Annex J addresses electrically small enclosures in reverberation chambers. Problems occurring in the testing of small enclosures having linear dimension less than 2 m are very different from determining the shielding effectiveness of large rooms and broad depending on the actual size of the enclosure itself. A number of other annexes are included that address rationale, mathematical formulas, selection of measurement techniques, preliminary measurement and repairs, wall-mounted monopoles, impedance mismatch correction, and using isolated monopoles in outer reverberation chambers.

Spécifications des produits

  • Standard de IEEE
  • Publié:
  • Radié:
  • Type de document: IS
  • Editeur: IEEE
  • Distributeur: IEEE
  • ICS: 33.100.10
  • Comité national: IEEE Electromagnetic Compatibility Society / Standards Development Committee

Relations produit

  • Référence: IEEE 299-2006
  • Référence: IEEE C95.1-2005
  • Référence: IEC 61000-4-21, Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods. International Electrotechnical Commission (IEC), Geneva, Switzerland, (2011).
  • Référence: IEC 61000-5-7, Electromagnetic compatibility (EMC) - Part 5–7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code), (2001).
  • Référence: IEC 61587-3 Ed. 2, Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks, (2013).