Carrello della spesa (0)
Standard

SAE J740_200602

Ritirato

Nota: Ultima versione: SAE J740_201110

Anteprima L'anteprima non è disponibile

Le modifiche e le versioni esistenti o nuove devono essere acquistate separatamente.

Lingua
Servizi

Astratto

To be used on cutting edges and end bits in conjunction with No. 3 head plow bolts (Ref. ANSI B18.9) typically used on off-road self-propelled work machines as described in SAE J1116. Cutting edges are further defined in SAE J737, J739 and J1304. End bits are further defined in SAE J63. 1 When section thickness exceeds A in drawing 1 ( Figure 2 ) (countersunk one side) or B in drawing 4 (countersunk both sides), use counterbore with diameter D, as shown in cross section drawings 2, 5 and 6, or extended countersink C, as shown in cross section drawings 3 and 7. 2 The inscribed circle of the square holes shall be concentric with countersink or counterbore within 0.03 in (0.8 mm).

Specifiche dei prodotti

  • Standard da SAE International
  • Pubblicato:
  • Ritirato:
  • Tipo di documento: IS
  • Pagine
  • Publisher SAE International
  • Distributor SAE International

Relazioni con i prodotti