Warenkorb (0)
Standard

IEEE 299.1-2013

Zurückgezogen

Hinweis: Neuste Ausgabe: IEEE 299.1-2013

Vorschau

Bestehende oder zukünftige Amendments und Versionen müssen separat erworben werden.

Sprache
Format

Zusammenfassung

New IEEE Standard - Inactive-Reserved. This standard provides uniform measurement procedures for determining the shielding effectiveness of electromagnetic (EM) shielding for a variety of enclosures and boxes having all dimensions between 0.1 m and 2 m in the radio frequency range not addressed by IEEE Std 299(TM)-2006. This standard is divided into two parts: Part I - 0.75 m to 2 m and Part II - physically small (< 0.75 m) but electrically large enclosures. In addition to a number of annexes aiding the measurement of shielding effectiveness of these enclosures, Annex I addresses physically small and electrically small enclosures, and Annex J addresses electrically small enclosures in reverberation chambers. Problems occurring in the testing of small enclosures having linear dimension less than 2 m are very different from determining the shielding effectiveness of large rooms and broad depending on the actual size of the enclosure itself. A number of other annexes are included that address rationale, mathematical formulas, selection of measurement techniques, preliminary measurement and repairs, wall-mounted monopoles, impedance mismatch correction, and using isolated monopoles in outer reverberation chambers.

Produktspezifikationen

  • Standard von IEEE
  • Ausgabedatum:
  • Rückzugsdatum:
  • Dokumenttyp: IS
  • Seiten
  • Herausgeber: IEEE
  • Lieferant: IEEE
  • ICS: 33.100.10
  • Nationales Komitee: IEEE Electromagnetic Compatibility Society / Standards Development Committee

Produktbeziehungen

  • referenziert: IEEE 299-2006
  • referenziert: IEEE C95.1-2005
  • referenziert: IEC 61000-5-7, Electromagnetic compatibility (EMC) - Part 5–7: Installation and mitigation guidelines - Degrees of protection provided by enclosures against electromagnetic disturbances (EM code), (2001).
  • referenziert: IEC 61587-3 Ed. 2, Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets and subracks, (2013).
  • referenziert: IEC 61000-4-21, Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods. International Electrotechnical Commission (IEC), Geneva, Switzerland, (2011).