Standard

IEC 60695-11-10:1999 ED1

Revidiert

Hinweis: Neuste Ausgabe: IEC 60695-11-10:2013 ED2

Bestehende oder zukünftige Amendments und Versionen müssen separat erworben werden.

Sprache
Format

Zusammenfassung

Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of vertically or horizontally oriented specimens made from plastic and other non-metallic materials, exposed to a small-flame ignition source of 50 W nominal power. These test methods determine the linear burning rate and the afterflame/afterglow times, as well as the damaged length of specimens. Applicable to solid and cellular materials that have an apparent density of not less than 250 kg/m3, determined in accordance with ISO 845. They do not apply to materials that shrink away from applied flame without igniting; ISO 9773 should be used for thin flexible materials. The test methods described provide classification systems which may be used for quality assurance, or the pre-selection of component materials of products. May be used for the pre-selection of a material, providing positive results are obtained at a thickness equal to the smallest thickness used in the application. Has the status of a basic safety publication in accordance with Guide 104.

Produktspezifikationen

  • Standard von IEC
  • Ausgabedatum:
  • Rückzugsdatum:
  • Edition: 1
  • Dokumenttyp: IS
  • Seiten
  • Herausgeber: IEC
  • Lieferant: IEC
  • ICS: 13.220.40
  • ICS: 29.020
  • Internationales Komitee: TC 89

Produktbeziehungen

Produktlebenszyklus