Warenkorb (0)
Standard

ASTM A677:07

Zurückgezogen

Hinweis: Neuste Ausgabe: ASTM A677:16(2023)

Vorschau Vorschau ist nicht verfügbar

Bestehende oder zukünftige Amendments und Versionen müssen separat erworben werden.

Sprache
Format

Zusammenfassung

This specification covers the standard requirements for flat-rolled nonoriented fully processed electrical steel intended primarily for commercial power frequency applications in magnetic devices. These electrical steels are low-carbon, silicon iron, or silicon-aluminum-iron alloys that may be made by basic-oxygen, electric-furnace, or other steelmaking practice. Desirable core-loss and permeability characteristics are developed during mill processing, so additional heat treatment is usually not required. The grades contained in this specification have thicknesses of 0.014 in. (0. 36 mm), 0.0185 in.(0.47 mm) and 0.0250 in. (0.64 mm). For a given thickness there are from 7 to 9 types based on the maximum value of core loss measured at 60 Hz and 15 kG (1.5 T) using the Epstein test method. Test methods to determine the required magnetic and mechanical properties are specified. Other typical magnetic and physical properties are listed for reference.

Produktspezifikationen

  • Standard von ASTM
  • Ausgabedatum:
  • Edition: 07
  • Dokumenttyp: IS
  • Seiten
  • ICS: 77.140.50
  • Nationales Komitee: American Society for Testing and Materials (ASTM) ,Philadelphia, USA
  • Herausgeber: ASTM
  • Lieferant: ASTM

Produktbeziehungen