Carrello della spesa (0)
Standard

ISO 12743:2021

Attuale
Anteprima

Le modifiche e le versioni esistenti o nuove devono essere acquistate separatamente.

Lingua
Servizi

Acquisto di una licenza per utente singolo

Riproduzione non consentita. Contattateci per informazioni sulle licenze.

Approfitta di uno sconto del 20% per i nuovi clienti sugli abbonamenti agli standard SNV e sulle licenze multiutente.

Astratto

This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the concentrates are susceptible to significant oxidation or decomposition, a common sample that is sufficiently representative, i.e. unbiased and sufficiently precise, is used for moisture determination and chemical analysis to eliminate bias (see ISO 10251). Any large agglomerates (>10 mm) present in the primary sample are crushed prior to further sample processing. Sampling of concentrates in slurry form is specifically excluded from this document. Stopped-belt sampling is the reference method for collecting concentrate samples against which mechanical and manual-sampling procedures can be compared. Sampling from moving streams is the preferred method. Both falling-stream and cross-belt samplers are described. Sampling from stationary lots is used only where sampling from moving streams is not possible. The procedures described in this document for sampling from stationary lots only minimize some of the systematic sampling errors.

Specifiche dei prodotti

  • Standard da ISO
  • Pubblicato:
  • Edizione: 4
  • Tipo di documento: IS
  • Publisher ISO
  • Distributor ISO
  • ICS 73.060.99
  • International TC ISO/TC 183

Relazioni con i prodotti

Ciclo di vita del prodotto