Standard

SAE 2009-01-2069

May 2009 Current

Existing or new amendments and versions must be purchased separately.

Language English

Services Online + Pdf CHF 0.00 Online CHF 0.00

There are no extended editions available for this standard

There are no available corrigendum or amendments for this standard. Any future corrigendum and amendments will be added automatically for subscribers.

Abstract

Lumped parameter analysis is a simple and commonly used technique for performing torsional analysis or design parameter sensitivity studies on automotive powertrains and drivelines. The purpose of this paper is to demonstrate the application of lumped parameter analysis to manual transmission gear rattle. A representative model is developed for a FWD manual transmission, as operated in a dynamometer test cell. Once validated by experimental data, the model is used to investigate the influence on gear rattle of parameters not readily modified or controlled during hardware evaluations. A sinusoidal torque is used to excite the system, and a signal processing technique similar to that derived in Part I of this two part paper is used to identify the inception of gear rattle. Functional relations for torque losses associated with shafts, gears, seals, lubricating oil flow and bearing clearances as a function of basic design parameters are included within the model. Correlation between the lumped parameter model and experimental results contained in Part I are presented. The effects of modifying basic design and operating parameters associated with various subsystems of the manual transmission are reported.

Products specifications

Standard from SAE International
Published: May 19 2009
Document type: IS
Pages
ISBN:

Publisher: SAE International
Distributor: SAE International

Create subscription

Extended editions Extended editions (0)

Version history Related Corrigenda and Amendments (0)

Abstract

Products specifications