Suchen in:
Warenkorb (0)
Information Unsere Geschäftsstelle bleibt vom 23.12.2024 bis 03.01.2025 geschlossen. Wir wünschen Ihnen schöne Feiertage.
Standard

ISO/ASTM 51205:2002

Zurückgezogen

Hinweis: Neuste Ausgabe: ISO/ASTM 51205:2017

Vorschau

Bestehende oder zukünftige Amendments und Versionen müssen separat erworben werden.

Sprache
Format

Zusammenfassung

ISO/ASTM 51205 covers the preparation, testing and procedure for using the ceric-cerous sulfate dosimetry system to measure absorbed doses in water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system is referred to as the ceric-cerous system. It is classified as a reference standard dosimetry system. Ceric-cerous dosimeters are also used as transfer standard dosimeters or routine dosimeters. ISO/ASTM 51205 describes both the spectrophotometric and the potentiometric read-out procedures for the ceric-cerous systems. The practice described applies only to gamma rays, X rays and high energy electrons and is applicable provided the following are satisfied: the absorbed-dose range is between 5 times 102 and 5 times 10 4 Gy; the absorbed-dose rate is less than 106 Gy/s; for radionuclide gamma-ray sources, the initial photon energy is greater than 0,6 MeV; for bremsstrahlung photons, the initial energy of the electrons used to produce the bremsstrahlung photons is equal to or greater than 2 MeV; for electron beams, the initial electron energy is greater than 8 MeV.

Produktspezifikationen

  • Standard von ISO/ASTM
  • Ausgabedatum:
  • Rückzugsdatum:
  • Einspruchsfrist bis:
  • Edition: 1
  • Dokumenttyp: IS
  • Seiten
  • Herausgeber: ISO/ASTM
  • Lieferant: ISO/ASTM
  • ICS: 17.240
  • Internationales Komitee: ISO/TC 85

Produktbeziehungen

Produktlebenszyklus